The eyedrop filling machine is used in the pharmaceutical, chemical, food, light industry and other industries to vacuum negative pressure and self-priming equipment for glass, plastic, metal and other containers. The caliber of the machine to be used should be small, and the liquid surface expansion stress in the caliber should be greater than the hydrostatic pressure, that is to say, the liquid does not flow out after the container is inverted. Such as oral plastic bottles, oil essence bottles, eye drops bottles, cosmetic perfume bottles, battery liquid filling and so on.

   The eye drops filling machine integrates mechanical, pneumatic and automatic. Shengying Eye Drops Filling Machine is the first generation of special equipment for filling eye drops in China. It has the characteristics of high degree of automation, high yield, wide adaptability and good stability, so it is favored by the majority of users. After 12 years of continuous improvement, the current models are becoming more sophisticated and mature. With its high technical content, good adaptability and excellent quality, the products rank first in the same industry! The market share accounts for more than 90% of the domestic eyedrops filling machine market, and the model has been exported to foreign countries in batches. The machine has automatic bottle handling, automatic bottle detection (with bottle filling, no bottle filling), bottle inner stopper, bottle cap with inner plug, and automatic capping function. It is suitable for filling filling bottles of various shapes such as round, flat or angular. It is especially suitable for domestic materials with large errors and various shaped bottles and inner caps. Compared with similar filling machines in foreign countries, The functional advantages of the aircraft are more obvious. It fully reflects the strength of our company in the design and production of non-standard products.

   Eye Drop Filling Machine Operation Sequence: Place the filled liquid bottle upside down on the work basket and check that the liquid bottle bottom is aligned.

   Place the vacuum basket in a vacuum fill, cover the lid quickly and lock it. Close the vent valve, the inlet valve, open the vacuum pump, adjust the true air conditioning valve to make the vacuum (depending on the amount of trial filling) to meet the process requirements, and step on the pedal to insert the liquid into the bottom of the filled liquid bottle. Slowly open the inlet valve, at which point the liquid level rises and the vent valve is opened to maintain the liquid level between the specified level of the sight glass. When the vacuum gauge pointer is in the 0 state, it is proved that the liquid filling is completed, and the foot collapsed plate is returned, and the liquid bottle which is quickly opened and the can lid is taken out and filled. For the troubleshooting of vacuum mercury (XD series but the rotary vane vacuum pump instruction manual), the vacuum pump should not be used for a long time (more than seven days). The oil used in the mercury should be drained and flushed with new oil, replaced with oil. The water is corrosive to the pump body.